Hey man I think you just need to install the Stalingrad mod and run CCReq, It worked for me (on GJS, but I don't see why it shouldn't work with this one).
To have a Req working for any mod you have 2 solution:
1° Use only 1 Req for all mod:
To run req in this case u have to do some modif:
First thing to know is you must have the mod runing before launching the req. Once the mod is runing and the req is launching go in "Files/Import game data > CC5 data" and enable all 9 category. Then press import and wait the time for the programs to imports them. Once that's done, u may have to close the Req and to launch it again. Now the Req is ready and qualibred with the right Mod. U will have to redone this if you change mod and want to use The Req for this other mod. For me that's ,not really the better way to use the req. i prefer using the second way.. check this out...
2° the better way to use the Req:
Create a new folder and name it with your mod name: IE:
GJS Req
Unzip the Req intot this new folder.
Now install your mod in your CCV. once that's done, launch your Req and import the data. your Req is ready and qualibred exclusivly for this mod.
Now you want to get another Req for another Mod, very simple just create a new folder and name it with your Mod name: IE: Stalingrad Req and unzipp your Req into thi folder, import data ...etc...
By this way you will have numerous Req for sure, but each Req will be qualibred exclusivly for One and only One mod.
Have fun
Tout est possible ... il faut juste connaitre quand.
I get the correct maps for the mods in CCReq. However, I always get 901 Lehr, Vickers MG, Sherman etc, so the force pool does not change, although I imported all 9 categories without error message.
Why is that? In my humble mind, the following happens: CCReq uses, in CC5AdbData, *.txt files.
CCReq gets those from …/Data/Base.
All the files that are *.adb in …/Data/Base (for example FPools, BGroups) are not translated from *.adb into *.txt!
The *.txt from /Data/Base, however, are transported correctly to CC5AdbData, as I can see from the creation date and time of the files.
Simply changing the extension from adb to txt does not help.
When u change mod at your CCV, u Must re-import again the data to your CCReq. Or you will get the latest mod data into your CCreq. As i told you after installed your Mod, if u using 1 and only 1 CCReq for all your mod u MUST import again the data. To avoid that, use multiple CCReq, one Req for one mod
Tout est possible ... il faut juste connaitre quand.
load your Mod on your CCV
launch your CCV and check if the mod is runing
close CCV and launch your Req
click on Req option" files/import game data / import CC5" .
enable each box and click on imports...
when it's done, close CCReq and launch it again...
now any Bg than u will see will be the Mod one...
all mod isnt complete, some still use older picture, older name, older graphix...
Tout est possible ... il faut juste connaitre quand.
Posted: Sun Jul 09, 2006 2:05 am Post subject: mmm
ok first trick is to make sure stalingrad mod is plugged in
unzip and a brand new cc req
update it with the unpack exe files (if necessary)
when u first go to open
it will ask u to import data
u need to check these boxes
first go and check maps
that there stalingrad
usually no probs there
then check to make sure teams r stalingrad teams
this is usually the one that never works first go
if u dont have sucess
delete the cc req
and try again
when u do have success rename the cc req to Stalingrad cc Req
and only use this cc req for stalingrad
u can repeat the steps again for other mods.
if a mod has a update
u will need to reopen a new cc req for it
Forget words,actions will show your true ambitions!The Battlefield,In many cases, the terrain of a battlefield can be the best resource a commander has. A clump of trees, an abandoned house, or a drainage ditch can all be powerful tools in the right hands
update it with the unpack exe files (if necessary)
• Colonel, u write “Files”.
• I have ONE (1), and that is in C:\...\Desktop\ccreq 0709\CCReq\Exe
• Do I need more???? BTW, in this folder, there also is cc2tga.exe
when u first go to open
it will ask u to import data
u need to check these boxes
• In the attachment you see what it does. Sorry, no option to check a box
first go and check maps
that there stalingrad
usually no probs there
• Yep, never had a problem here
then check to make sure teams r stalingrad teams
this is usually the one that never works first go
• Good to hear!
if u dont have sucess
delete the cc req
and try again
• Is this the trick? Unpack CCReq until it works? How often, from your experience? How can there be a difference, when I unpack the same exe several times?
Forget words,actions will show your true ambitions!The Battlefield,In many cases, the terrain of a battlefield can be the best resource a commander has. A clump of trees, an abandoned house, or a drainage ditch can all be powerful tools in the right hands
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
In August of 2004, Zappi, Homba, Bambam887, RedScorpion and MOOXE all pitched
in to create this Close Combat site. I would to thank all the people who have visited
and found this site to thier liking. I hope you had time to check out some
of the great Close Combat mods and our forums. I'd also like to thank
all the members of our volunteer staff that have helped over
the years, and all our users that contributed to this site!
